Alumina Plastic Lotion Pumps with A Lock Clip 1.2ml Dosage OEM

11 06,2024

1、 Understand the type and characteristics of sprayIt is crucial to have a deep understanding of the types and characteristics of Trigger Sprayer before using it correctly. There are many kinds of common Trigger Sprayers on the market, including but not limited to household cleaning spray, gardening spray, cosmetics spray bottles and medical disinfection spray. Each spray has its unique design, for example, household cleaning spray often have stronger spray pressure and wider spray range, so as to quickly cover and clean large areas; The cosmetics spray bottle pays more attention to the delicate and even spray effect to keep the skin comfortable and moist. Some advanced spray are also equipped with adjustable nozzles. Users can adjust the spray mode according to actual needs, from fine fog to coarse fog, or even form a straight line spray to meet the use needs in different scenes. Therefore, before use, be sure to read the product manual to understand the specific types and characteristics of the selected spray, which is the first step to maximize the spray effect. 2、 Check the status of sprayBefore starting Trigger Sprayer, a comprehensive inspection of its status is the basis for ensuring the spray effect. First, make sure that the appearance of the spray is intact without obvious cracks or deformation, because this may affect the uniformity and stability of spray. Then, carefully check the nozzle to ensure that there is no dust, residue or other impurities blocking, which will affect the smoothness and fine density of spray. If nozzle blockage is found, a soft bristled brush or fine needle can be used to gently clean it, avoiding the use of hard objects to avoid damaging the nozzle structure. Check whether the liquid inside the spray is sufficient, and confirm that the liquid type is compatible with the spray material to avoid the spray damage or poor spray effect caused by chemical reaction. If the spray is designed with air pressure adjustment function, check whether the air pressure is moderate, too high or too low air pressure will affect the spray effect. 3、 Hold and use the spray correctlyThe correct grip and usage are key to the optimal performance of Trigger Sprayer. First of all, the handle of the spray should be held comfortably, and the fingers should be naturally attached to the spray button. This can ensure that the fingers can press the button easily and stably during operation, so as to avoid the spray from deviating from the target due to unstable grip. Secondly, when using the spray, keep the nozzle at an angle with the target area, which should be adjusted according to the spray demand and the target shape to ensure that the spray can evenly cover the entire area. At the same time, the pressure on the spray button should be moderate, not too strong or too light, too strong may lead to excessive spray, waste of liquid and poor effect; If it is too light, the spray may not be enough to achieve the desired effect. In the process of spray, the spray should be kept stable, and large shaking or tilting should be avoided, so as not to affect the accuracy and uniformity of spray. Through repeated practice, you can find the most suitable holding method and spray rhythm. 4、 Optimize spray effectIn order to maximize the spray effect of Trigger Sprayer, it needs to be optimized from several aspects. First of all, it is an important step to shake up the liquid. Especially when using a liquid containing multiple components, shaking up can ensure the uniform distribution of various components and avoid uneven color or inconsistent effect when spray. Secondly, adjusting the spray distance is the key. Too close distance may lead to too concentrated spray and limited coverage; If the distance is too long, the spray may be too dispersed to form an effective cover. Therefore, in actual operation, the spray distance should be gradually adjusted according to the type of spray and spray demand until the best spray effect is found. Controlling spray volume is also an important part of improving spray effect. You can accurately control spray volume by pressing the duration of spray button to avoid waste and poor effect. At the same time, pay attention to the selection of spray angle, and flexibly adjust the angle of the spray according to the shape and size of the target area to ensure that the spray can evenly cover the target area and avoid missing or repeating spray. Finally, avoid excessive use of spray, and follow the product instructions and recommended use frequency, which can effectively extend the service life of spray, while maintaining the best spray effect. 5、 Maintenance and upkeepRegular maintenance and upkeep are key to ensuring the long-term efficient operation of Trigger Sprayer. Cleaning the nozzle is the basic step to maintain the spray. After long-term use, the nozzle may accumulate dust, residues or other impurities, affecting the smoothness and effect of spray. The nozzle should be cleaned regularly with clean water or specialized cleaning agents, avoiding the use of cleaning agents containing abrasive particles to prevent damage to the nozzle surface. Secondly, it is also very important to check the tightness of the spray, including the connection between the sprayer and the bottle body, the air pressure regulating valve and other parts, to ensure that there is no leakage or looseness, so as to maintain the normal function of the spray. In addition, when storing the spray, it should choose a dry, cool and ventilated place, avoiding direct sunlight and high temperature environment, to prevent the material from aging or deformation. For the spray that has not been used for a long time, it is recommended to empty the internal liquid to avoid liquid deterioration or corrosion of the internal parts of the spray. Regular maintenance can ensure that the Trigger Sprayer is always in good working condition, extend its service life, and maintain the best spray effect.

11 06,2024

1. Choose a high-quality lotion pumpChoosing a high-quality lotion pump is the key to preventing leakage. High-quality lotion pumps usually use high-quality materials and advanced manufacturing processes, which can effectively reduce leakage problems caused by material defects. Common high-quality materials include polypropylene (PP), polyethylene (PE) and other corrosion-resistant and wear-resistant materials that can withstand the chemical composition and environmental changes of the lotion. When choosing a brand, you can refer to user reviews and professional reviews to understand the brand's reputation in the market. Well-known brands usually undergo strict quality control and provide products with higher reliability. Pay attention to the warranty and after-sales service of the product when purchasing. Good after-sales service can provide you with additional protection. If there is a leakage problem, the brand can usually provide support and solutions in time. Investing in high-quality lotion pumps can provide a better experience for subsequent use, reduce the frequency of maintenance and replacement, and thus improve economic benefits. 2. Ensure correct installationThe correct installation of the lotion pump is an important part of preventing leakage. During the installation process, it is crucial to ensure the sealing between the pump body and the bottle mouth. If the installation is improper, a gap may appear between the pump body and the bottle mouth, causing leakage. Before installation, check the contact surface between the bottle mouth and the pump body to ensure that there are no debris and contaminants and keep it clean. When installing, tighten the pump head with uniform force to ensure that the sealing ring fits firmly on the bottle mouth. After installation, gently press the pump head to observe whether there is any liquid leakage. If leakage is found, stop using it immediately and reinstall the pump. In actual use, check the installation regularly, especially after long-term use, it may become loose. To ensure reliability in long-term use, it is recommended to check and adjust it every time the liquid is changed to keep the pump in the best condition. 3. Check the sealing regularlyRegularly checking the sealing of the lotion pump is an important step to ensure its normal use. The sealing ring is a key component of the lotion pump. As the use time increases, it may wear, age or deform, resulting in a decrease in the sealing effect. Therefore, it is recommended to check the status of the sealing ring regularly, especially after changing the liquid or not using it for a long time. The sealing condition can be detected by visual inspection or by gently pressing the pump head. If the sealing ring is found to have cracks, deformation or signs of aging, replace it with a new sealing ring in time to ensure the normal use of the pump. It is also necessary to check the contact surface between the pump body and the bottle mouth to ensure that there are no debris and residues that affect the sealing effect. Through regular maintenance and inspection, leakage problems can be effectively reduced, the service life of the lotion pump can be extended, and the user experience can be improved. 4. Properly adjust the pressureWhen using the lotion pump, it is crucial to maintain appropriate pressure. Excessive internal pressure will cause the liquid to flow poorly inside the pump and may even cause leakage. Every time you use the lotion pump, press the pump head gently and maintain moderate force to avoid excessive squeezing. Before use, it is recommended to check the filling height of the liquid to avoid overfilling the pump with liquid, as overfilling will cause the liquid to overflow when squeezing. When storing the lotion pump for a long time, it is recommended to extract an appropriate amount of liquid from the pump to reduce internal pressure and avoid leakage caused by gas expansion. Maintaining proper use and storage conditions can ensure that the pump performs well during use and reduce leakage caused by excessive pressure. 5. Choose the right liquid viscosityDifferent types of lotion pumps are suitable for liquids of different viscosities. Choosing the right liquid viscosity is crucial to preventing leakage. The design of lotion pumps is usually based on specific liquid properties. Liquids that are too thick or too thin may affect the normal operation of the pump. If the viscosity of the liquid is too high, it may cause the pump to have increased resistance during operation, causing leakage. When choosing a lotion pump, you should consider the viscosity of the liquid used and ensure that the pump can adapt to this viscosity range. If the liquid you are using is relatively viscous, you can consider using a pump designed for high-viscosity liquids, which usually has better sealing performance and fluidity. During the production process, the liquid can be appropriately diluted to ensure its fluidity in the pump and the normal operation of the pump. 6. Avoid extreme temperaturesThe materials of lotion pumps are very sensitive to changes in temperature. Extreme temperature conditions may cause the material to expand or contract, thereby affecting the sealing performance. When using and storing lotion pumps, try to keep them within the appropriate temperature range and avoid direct sunlight, high temperature or cold environments. For example, long-term exposure to sunlight may cause material aging and accelerate the damage of the seal; in extremely cold environments, the material may become brittle and lose elasticity, increasing the risk of leakage. The ideal storage environment is a dry, cool place to avoid temperature fluctuations. For lotion pumps that need to be used outdoors, choosing materials that can resist environmental changes will help improve their performance. Paying attention to temperature changes and taking appropriate protective measures can effectively reduce leakage problems caused by temperature changes. 7. Pay attention to transportation and storageWhen transporting and storing lotion pumps, preventing severe vibration and squeezing is an important part of preventing leakage. During transportation, choose appropriate packaging materials to ensure that the pump body will not be damaged by external impact. The use of fillers and protective layers can effectively absorb vibrations and prevent deformation of the pump body or damage to the sealing ring. In addition, when storing, avoid placing the lotion pump in a place that is easy to invert to prevent liquid leakage under improper circumstances. Ensuring the safety of the pump during transportation and storage can reduce the risk of leakage during subsequent use. In the storage environment, keep it dry and clean to avoid the influence of moisture and dust on the pump body, which will help extend the service life of the lotion pump.

11 06,2024

1. Correct installation: Before using the 4cc Lotion Pump, it is crucial to ensure that it is properly installed on the container. When installing, first check the pump's threads or joints to ensure that they match the interface of the container mouth. Incorrect installation may cause leakage or uneven spraying. It is recommended to use a clean cloth or paper towel to clean the container mouth before installation to remove dust and impurities to ensure a good sealing effect. When installing, you need to maintain moderate force and do not use too much force to avoid damaging the pump or container. After confirming that the installation is correct, you can gently shake the container to observe whether the pump is firm to ensure that it will not loosen during use. 2. Uniform squeezing: When using the 4cc Lotion Pump, uniform squeezing is the key to ensuring a consistent amount of liquid sprayed. Each time you squeeze, maintain a steady speed and avoid sudden force, which can prevent too much or too little liquid from spraying. Moderate pressure helps control the amount of spraying and ensures that you can get the expected effect every time you use it. In order to better grasp the strength of squeezing, you can first test spray on a paper towel to familiarize yourself with the pump's response. This will not only improve the accuracy of the spray, but also reduce waste, thereby making more efficient use of the product. 3. Clean the pump head: After using the 4cc Lotion Pump, timely cleaning of the pump head is an important part of maintenance. The pump head is prone to residual liquid, especially when using oily or viscous liquids. If not cleaned in time, these residues may cause the pump head to clog and affect the effect of the next use. When cleaning, use a damp cloth to gently wipe the pump head and rinse the pump head part with warm water. If necessary, a mild detergent can be used. After cleaning, make sure the pump head is completely dry to avoid moisture affecting the quality of the liquid. Regularly cleaning the pump head can maintain the smoothness of the spray and the long-term effectiveness of the equipment. 4. Storage Note: When storing the 4cc Lotion Pump, choose a suitable environment to ensure that its materials are not damaged. Avoid placing the device in direct sunlight or high temperature. Strong ultraviolet rays and heat will accelerate the aging of the material and may cause the plastic part of the pump to crack or deform. The ideal storage environment should be a cool, dry and well-ventilated place. When the pump is not used for a long time, it is best to put it in the original packaging to prevent the entry of dust and pollutants. Check the humidity and temperature of the storage environment regularly to ensure that the device is always in the best condition. 5. Add the right amount of liquid: When adding liquid to the 4cc Lotion Pump, you must pay attention to the amount of liquid added. Overfilling may not only cause the pump to clog, but also increase the pressure of the liquid in the container, affecting the spraying effect. The ideal approach is to determine the amount of liquid added based on the maximum volume of the pump, and usually leave a certain amount of space to ensure that the pump can work smoothly. When adding liquid, you can use a funnel or pourer to ensure that the liquid will not spill. Check the liquid level in the container regularly so that you can replenish it in time when needed to keep the equipment in good working condition. 6. Check compatibility: Before using the 4cc Lotion Pump, it is crucial to confirm that the filled liquid is compatible with the material of the pump. Certain chemical components may corrode or damage the material of the pump, resulting in performance degradation or leakage of the equipment. When choosing a liquid, you should read the product manual carefully, understand the properties of the liquid, and conduct small-scale tests to ensure that it will not have an adverse effect on the pump. For example, liquids containing acidic or alkaline components may corrode plastic parts. It is recommended to conduct sufficient research and testing before use to protect the long-term use of the pump. 7. Regular maintenance: Regular maintenance of the 4cc Lotion Pump is the key to maintaining its good performance. Check the various parts of the pump regularly, especially the seals and valves, to ensure that there is no wear or aging. If any abnormalities are found, the damaged parts should be replaced in time to avoid affecting the use. A maintenance plan can be formulated, such as a comprehensive inspection every few weeks to ensure that each component is working properly. Good maintenance not only improves the performance of the equipment, but also significantly extends its service life. 8. Avoid dry pump operation: Operating the 4cc Lotion Pump without liquid is called "dry pumping", which can cause serious damage to the equipment. Dry pumping can cause excessive wear of the parts inside the pump and increase the risk of failure, so be sure to check whether there is enough liquid in the container before use. If the liquid runs out, it should be replenished in time to ensure that the pump works properly. If it is found that the pump fails to spray liquid normally during use, it should be stopped immediately to check whether there is blockage or dry pumping. By avoiding dry pumping operation, the reliability and service life of the equipment can be significantly improved.

11 06,2024

1. Regular cleaning: It is crucial to clean the Micro Sprayer immediately after use, especially after spraying chemicals or fertilizers. Residual liquid dries in the nozzle and pipes, which will cause blockages and affect the spray effect. When cleaning, the removable parts should be disassembled and all parts should be thoroughly rinsed with clean water, especially the nozzle, filter and liquid container. Mild detergents can be used, but avoid strong acid or alkaline detergents to avoid damaging the materials. After cleaning, make sure all parts are completely dry before reassembling, which can prevent mold or bacteria from growing. The exterior should also be wiped with a damp cloth to keep the appearance of the equipment clean, which will help improve the user's operating experience and the overall life of the equipment. 2. Check the nozzle: The nozzle is one of the core components of the Micro Sprayer, and it is crucial to check the condition of the nozzle regularly. Blockage and wear will directly affect the uniformity and spray range of the spray. Disassemble the nozzle regularly to check for sediment, impurities or other blockages. If blockage is found, it should be immediately dredged with a small tool such as a needle. If the nozzle surface is worn or deformed, it may cause uneven spraying, and it is recommended to replace it in time. Keeping the nozzle clean can not only ensure the spray effect, but also extend the service life of the nozzle. Maintenance and care of the nozzle after use is a key link to ensure the normal operation of the Micro Sprayer. 3. Storage environment: The storage environment of the Micro Sprayer directly affects its service life. Avoid placing the device in direct sunlight, humid or high temperature places. Strong sunlight can cause aging and fading of the equipment materials, while high temperature environments may affect the stability of the internal liquid or cause deformation of the seals. The ideal storage environment should be a dry, cool and well-ventilated place. When not in use for a long time, it is best to put the device back in the original packaging to avoid the invasion of dust and dirt. The temperature and humidity of the storage environment should also be checked regularly to ensure that the equipment is in a suitable storage state. 4. Regular lubrication: For the mechanical parts inside the Micro Sprayer, regular lubrication is an important part of maintenance. Lubrication can reduce friction, prevent component wear, and ensure the smooth operation of the sprayer. Especially for moving parts such as pistons and valves, the state of the lubricating oil should be checked regularly. If the lubricating oil is found to be dirty or reduced, it should be replenished or replaced in time. It is crucial to use the right lubricant and avoid using lubricants that are too viscous or not suitable for the material to avoid additional friction or blockage. Regular lubrication maintenance can also avoid equipment failures due to lack of lubrication, thereby extending its overall service life. 5. Check the connectors: The connectors and pipes of the Micro Sprayer are key components to ensure the normal operation of the equipment. It is crucial to check whether they are firm regularly. Loose connectors may cause liquid leakage, affecting the spray effect and work efficiency. Before each use, all connectors, including nozzles, valves and pipe interfaces, should be carefully checked to ensure that there is no leakage or looseness. If problems are found, the damaged parts should be tightened or replaced in time. When using, avoid frequent plugging and unplugging of connectors to reduce the risk of wear and damage. Keeping the connectors clean and checking the sealing regularly can effectively improve the performance and stability of the Micro Sprayer. 6. Use the right liquid: Using a spray liquid that matches the Micro Sprayer is the key to ensuring its efficient operation. Liquids that are too viscous or corrosive may damage the pump and nozzle, causing equipment failure. Therefore, when choosing a spray liquid, you should read the product manual carefully to ensure that it is compatible with the equipment. Before use, a small-scale test can be conducted to verify the spray effect of the liquid and the adaptability of the equipment. Avoid using unfiltered liquid to prevent impurities from causing blockage. Maintaining the freshness and quality of the liquid and regularly replacing the used agents can improve the spray effect and ensure the normal operation of the sprayer. 7. Follow the operating specifications: The correct operating method is an important part of maintaining the Micro Sprayer. Follow the operating manual provided by the manufacturer to ensure that the use and maintenance are carried out according to the prescribed procedures, which can effectively reduce the occurrence of equipment damage and failure. During operation, pay attention to the load of the equipment and do not overload it to avoid unnecessary losses. Operators should be trained regularly to ensure that they understand the operating specifications and safety precautions of the equipment. Through standardized operating procedures, production efficiency can be improved, the service life of the equipment can be extended, and the sprayer can maintain stable performance in various applications.